T1 is a trenching system that works both subsea and onshore. We can adapt T1 to operate in cutting and jetting mode, for multiple soils and various environmental conditions.
Unique offshore and onshore capability
Variable modes for enhanced burial
Simultaneous cable / pile laying and burial
Trench depths to 1.3m in wheel cutter mode
Trench depths to 2.0m in jetting mode
Cutting and Jetting
With 520kW of power, Enshore’s T1 trencher provides enhanced burial at depths of up to 1.3m in cutting mode and 2.0m in jetting mode.
Supported by teams who understand the many challenges of making a transition from subsea to onshore, T1 is the ideal equipment solution for flow lines, pipeline burial, and umbilicals and power cables on the beach, in the surf and offshore.
ENSHORE T1 OVERVIEW |
|||
| Wheel Cutter | JETTER | ||
| Operating Depth | 1000m | 1000m | |
| Max. Product Diameter | 250mm | 500mm | |
| Max. Trench Depth | 1.3m | 2.0m | |
| Length | 13m | 11.5m | |
| Width | 5.5m | 5.5m | |
| Height | 6.5m | 6.5m | |
| Weight in Air | 25te | 19.5te | |
| Weight in Water | 16te | 12te | |
SPEED RANGE |
|||
| No Burial | 0 -1500m/hr | ||
| Trenching with Cutter Chain | 50 - 250m/hr | 50 - 500m/hr | |
VEHICLE POWER |
|||
| 520W (2 x 260kW) electric motor supply main vehicle hydraulics and 2 fixed / variable speed drives and water supply | |||
SOIL TYPES |
|||
| Wheel Cutter | Suitable for all sands, soft to hard clays and weak rock | ||
| Jetter | Suitable for all uncemented sands, and soft to firm clays | ||
PRODUCT HANDLING |
|||
| Wheel Cutter | Product is carried from the front mounted bell-mouth over the top of the vehicle, through trough assembly, to wheel cutter. Bellmouth fitted with feeler assembly to assist in monitoring cable catenary during simultaneous lay-trench operations. | ||
| Jetter | Product passes underneath Trencher between tracks before passing through jet legs into fluidised trench. Bellmouth fitted with feeler assembly to assist in monitoring cable catenary during simultaneous lay/trench operations. Depressor can be fitted between jet legs to ensure positive depth location when trenching flexible products. | ||
WHEEL CUTTER |
|||
| Cutter | Wheel type mechanical cutter with depressor assembly and enclosed cable handling system mounted on rear instrumented tool linkage | ||
| Flow Rate | 437m3/hr @ 4.6 bar | ||
| Trench Width | Up to 390mm | ||
| Wheel Type | External spur gear transmission | ||
| Cutting Picks | 37.5mm diameter Tungsten Carbide point attack cutting picks | ||
| Wheel Speed | Up to 50RPM | ||
JET TOOL |
|||
| Gap Between Legs | 200-500mm maximum | ||
| Flow Rate | 1748m3/hour at 4.6 bar | ||
| Forward Jet Tool | Not product engaging, suitable for tight turns, loops, close proximity etc. | ||
| Cutting Picks | 5mm diameter Tungsten Carbide point attack cutting picks | ||
CRANE MANIPULATOR |
|||
| Maximum Load | 2000kg | ||
| Maximum Reach | 7m | ||
| 8 functions total + boom mounted camera for peripheral vision | |||
SURVEILLANCE EQUIPMENT |
|||
| Obstacle Avoidance Sonar | |||
| 6 x Subsea Cameras | |||
| 2 x Pan & Tilt Units | |||
| 1 x Rotator Unit | |||
| 8 x Subsea Lights | |||
| Responder / Transponder | |||
| Mini F.O.G Gyro | |||
| 2 x 720i Gemini Sonar | |||
If you’d like to enquire about using this machine, please contact us.
Registered in England and Wales. No. 13146439
website by layers studio
If you’d like to enquire about using this machine, please fill out the form below.
"*" indicates required fields
If you’d like to enquire about our expertise, please fill out the form below.
"*" indicates required fields